FARR-OFFROAD.COM

FL 350 AND FL 400 ENGINE CONVERSION KITS, SUSPENSION UPGRADE KITS, DISC BRAKE CONVERSION KITS FL 350 PARTS, FL 400 PARTS

STEPS

1. CUT OUT ALL THE TUBES AS PICTUERED

2. ON THE INSIDE OF THE FRAME CUT THE UPPER RAIL ALONG THE CENTERLINE

3. ON THE OUTSIDE OF THE FRAME CUT THE UPPER RAIL A 1/4 INCH BELOW CENTER

4. MAKE SURE TO LEAVE 1 AND 1/8 OF THE SHOCK BUNG IN PLACE

5. TRIM THE FRAME MOD TO FIT AND TACK IN PLACE

6. TACK THE LONG FLATBAT INSIDE THE UPPER RAIL TO CAP IT OFF

7. DRILL THE SHOCK BUNG  OUT TO 5/8 ALONG WITH THE SHOCK

8. BOLT THE SHOCK IN  PLACE  AND TACK THE ROUND NUT PROVIDED

9. MARK THE BOLT AND TRIM THE EXCESS

10. WELD FULLY

11. USE THE SHORT FLATBARS  TO  DIAGONALLY  BRACE THE CORNERS  AND WELD IN PLACE

Frame Mod Instructions

Members Area

Recent Photos

Featured Products

Recent Videos

2948 views - 0 comments
2884 views - 0 comments
2766 views - 0 comments
3225 views - 0 comments